Doorway Thresholds What's The Best Method To Cut And Place Wooden Thresholds?
What's the best method to cut and place wooden thresholds? - doorway thresholds
I 2 square meters of wooden flooring and installed in another, but never to the installation of sleepers. Now there are ugly jagged edges between 5 door, every situation, a different file. How to cut a new level when I height differences of up to 1.5 "? Thanks.
|
4 comments:
What I usually a piece of 3 / 4 "oak and break with a circular saw to the width you want to take, then add an additional 3 / 4" strips down on the ground floor. This will give you 3 / 4 "on one side and 1.5" on another. Cut at an angle of 45 degrees at the top of both sides and it is good to go. I usually fix only, using liquid nails and last 8D nails. Liquid nails to prevent squeaking.
Good luck!
1.5 inches, you need to take a step. This is a travel insurance risk.
1.5 inches, you need to take a step. This is a travel insurance risk.
You can make a small ramp. You do not really want to go in only one and a half inches. You can choose from marble or wood, of course, to use depends on your body.
Post a Comment